Application of 3D Printing on Design and Manufacture of Baroque Pearl Jewelry

Jianyang HUA; Yan LI; Honghe MU; Jia'en DU; Xiaoxia ZHENG; Liang HAO; Fei MA

doi:10.15964/j.cnki.027jgg.2020.01.007

Volume 22 Issue 1

Jan. 2020

Turn off MathJax

Article Contents

Article Navigation > Journal of Gems & Gemmology > 2020 > 22(1): 51-60

Jianyang HUA, Yan LI, Honghe MU, Jia'en DU, Xiaoxia ZHENG, Liang HAO, Fei MA. Application of 3D Printing on Design and Manufacture of Baroque Pearl Jewelry[J]. Journal of Gems & Gemmology , 2020, 22(1): 51-60. doi: 10.15964/j.cnki.027jgg.2020.01.007

Citation:

Jianyang HUA, Yan LI, Honghe MU, Jia'en DU, Xiaoxia ZHENG, Liang HAO, Fei MA. Application of 3D Printing on Design and Manufacture of Baroque Pearl Jewelry[J]. Journal of Gems & Gemmology , 2020, 22(1): 51-60. doi: 10.15964/j.cnki.027jgg.2020.01.007

Citation:

PDF( 7417 KB)

Application of 3D Printing on Design and Manufacture of Baroque Pearl Jewelry

doi: 10.15964/j.cnki.027jgg.2020.01.007

Jianyang HUA¹,
Yan LI^{1, 2
,
,},
Honghe MU¹,
Jia'en DU¹,
Xiaoxia ZHENG¹,
Liang HAO^{1, 2},
Fei MA³

1.
Gemmological Institute, China University of Geosciences, Wuhan 430074, China
2.
Hubei Engineering Research Center of Jewelry, Wuhan 430074, China
3.
Zhuji Huadong International Jewelry City Co., Ltd., Zhuji 311800, China

Received Date: 2019-06-11
Publish Date: 2020-01-01

Abstract

Abstract

3D printing is widely used in jewelry design and production because of its high precision, which can effectively realize the designer's idea. The combination of 3D printing technology and baroque pearl design can fully display the aesthetic value of the baroque pearl, thus enhancing the added value of the baroque pearl product. This paper introduces the concept of 3D printing technology, reviews the status quo of metal 3D printing technology, baroque pearl jewelry design and 3D printing technology combining with jewelry design at home and abroad, and innovatively proposes the combination of metal 3D printing and baroque pearl jewelry design and production. The design, scanning, modeling and printing of the baroque pearl samples are carried out, which shows that the design process not only saves the manpower and time but also contributes to the ideal pieces of baroque pearl jewelry.It confirms that the combination of metal 3D printing and baroque pearl jewelry design and manufacture can fully display the design aesthetic feeling of baroque pearl and realize its aesthetic value.
- 3D printing,
- baroque pearl,
- jewelry design,
- jewelry modeling

FullText(HTML)

References(21)

References

[1]	黎志勇, 杨斌, 王鹏程, 等.金属3D打印技术研究现状及其趋势[J].新技术新工艺, 2017(4):25-28.
[2]	Hirt L, Reiser A, Spolenak R, et al. Additive manufacturing of metal structures at the micrometer scale[J]. Advanced Materials, 2017, 29(17):1604211. doi: 10.1002/adma.201604211
[3]	黄忠, 韩江.金属3D打印技术的发展现状及制约因素[J].山东农业工程学院学报, 2018, 35(3): 40-43.
[4]	Xiong W, Hao L, Li Y, et al.Effect of selective laser melting parameters on morphology, microstructure, densification and mechanical properties of supersaturated silver alloy[J]. Materials & Design, 2019(170):1-12.
[5]	顾冬冬, 沈以赴, 杨家林, 等.多组分铜基金属粉末选区激光烧结致密化机理[J].中国有色金属学报, 2005, 15(4): 596-602.
[6]	沈以赴, 吴鹏, 顾冬冬, 等. Ni-CuSn混合粉末选区激光烧结试验[J].焊接学报, 2005, 26(2): 73-76.
[7]	Reset Styles. Thin winged cuff[EB/OL].[2019-05-15]. https://www.shapeways.com/product/K43DTH64E/thin-winged-cuff?optionId=24461411&li=marketplace.
[8]	Wazyn Studio. Octopus ring 17mm[EB/OL]. [2019-05-15]. https://www.shapeways.com/product/87AYSESX3/octopus-ring-17mm?optionId=12353595&li=marketplace.
[9]	Tinarity's. Cuff 'Patterns'[EB/OL]. [2019-05-15]. https://www.shapeways.com/product/NDECTUJWL/cuff-patterns?optionId=59403897&li=curatedproductGroup.
[10]	Arx Studio. Death star cufflinks[EB/OL].[2019-05-15]. https://www.shapeways.com/product/PNQ5FG2SQ/death-star-cufflinks?optionId=64134386&li=marketplace.
[11]	AISATO Design Shop. Lace necklace[EB/OL].[2019-05-15]. https://www.shapeways.com/product/Z4UG5UYYL/lace-necklace?optionId=60318675&li=marketplace.
[12]	Swallow. LifeOnPrint[EB/OL].[2019-05-15].https://www.shapeways.com/product/ZV2H6XKE7/swallow?optionId=61068348&li=marketplace.
[13]	吴薇茜. Blink项链: 基于首饰新科技与趋势的设计应用[D].长沙: 湖南大学, 2016.
[14]	师新莉, 侯佳希, 吴宣润.基于3D打印技术的异形珠移动端定制平台设计探究[J].设计, 2017(1):60-61.
[15]	王晓昕. 3D打印与当代金工首饰的结合[J].中国艺术, 2018(8): 32-41.
[16]	熊玮, 郝亮.基于3D打印和失蜡铸造技术的首饰活动结构创新设计(英文)[J].宝石和宝石学杂志, 2016, 18(5): 63-72. http://bshb.cbpt.cnki.net/WKD/WebPublication/paperDigest.aspx?paperID=18af123c-3bc9-40fa-9e47-d94ca01852dc
[17]	赵秋苇, 熊玮, 郝亮. 3D打印技术在空窗珐琅中的工艺设计创新[J].宝石和宝石学杂志, 2018, 20(S1): 196-200. http://bshb.cbpt.cnki.net/WKD/WebPublication/paperDigest.aspx?paperID=f600a2e4-ad25-4404-b9b7-909c67d15e4a
[18]	杨景周, 李妍. 3D打印个性化陶瓷吊坠首饰[J].宝石和宝石学杂志, 2018, 20(S1): 201-203. http://bshb.cbpt.cnki.net/WKD/WebPublication/paperDigest.aspx?paperID=f93cdddb-b582-4a25-bbac-4f8d0a1a963f
[19]	徐可.异形珍珠饰品的设计构想[J].宝石和宝石学杂志, 2013, 15(4): 82-85. http://bshb.cbpt.cnki.net/WKD/WebPublication/paperDigest.aspx?paperID=de9a68ee-898c-4bbc-99bc-088773556ba3
[20]	赵子衿. 3D打印技术在首饰加工中的应用[J].西部皮革, 2016, 38(22):12.
[21]	程卡卡, 李妍, 郝亮, 等.3D扫描及颜色测量技术在珍珠分选的应用[J].宝石和宝石学杂志, 2019, 21(4):36-44. http://bshb.cbpt.cnki.net/WKD/WebPublication/paperDigest.aspx?paperID=54dc9538-e5dc-4a5e-a8ff-44017d1ce97b